Industrial Hoist

Product Details:

SCANCLIMBER SC1432 can be used either as a single or double cage personnel and material hoist. Its loading capacity is 1400 kg or 17 persons. Maximum lifting height with anchored mast is 200 m.

Product Details:

SC8P is a single mast personnel and material hoist. It has a platform size of 1.4 x 1.7 m and a payload capacity of 5 persons or 500 kg. It can be used to transport workers, materials and equipment to the correct height in one go. They save a lot of time compared to the use of scaffolding and other lifting methods. In addition, site safety is greatly improved when workers need not climb to higher floors on scaffolding. Separate material or personnel hoists will not be needed, because all transport can be handled using the same hoist. SC8P HOIST is quick and easy to install and dismantle. The hoist requires no separate foundation as it is installed on its own frame. The only requirement is that the ground is levelled and hard. The frame structure is light but rigid and sturdy. With the frame replacing the ground station of conventional construction hoists, the hoist is significantly quicker and easier to install and move around the site than heavy construction hoists.

Product Details:

SCANCLIMBER SC2032-48 can be used either as a single or double cage personnel and material hoist. Its loading capacity is 2000 kg or 24 persons. Maximum lifting height with anchored mast is 200 m.

Additional Information:

• Item Code: SC2032-48

Product Details:

SC3237-65H is the most powerful construction hoist in the Scanclimber Wega H65 personnel and material hoist product family. It can be used either as a single or double cage personnel and material hoists. Its loading capacity is 3200 kg or 27 persons. Maximum lifting height with anchored mast is 200 m but at the request higher heights are possible.

 

THE CAGE length is 3.7 m. Doors can be assembled on one or every side of the cage. The front door and the back door are 1.5 m wide and the side door offers a wider 2.6 m door opening for bigger materials. The cages lifting speed can be selected from normal speed 36 m/min, mid-speed 54 m/min or high speed 90 m/min.

Product Details:

SC400K is the second smalest hoist of Scanclimber Light-weight industrial hoist product family. With a load capacity 400 kg and lifting speed from 36 to 60 m/min hoist provide a fast and convenient way to carry smaller payloads of personnel and materials vertically in demanding conditions such as at bridges, harbours, mines, silos, power plants and ship building.

THE MODULAR SYSTEM allows to choose hoist with the required configuration and special features and characteristics. There are available a wide variety of landing doors and mast anchoring systems. The hoist's structure and material are resistant to weather variations and retard the influence of corrosive materials. The hoist can be installed both indoors and outside.

A MAST CAN CHOSEN according the hoist's installation space needs. Special conditions may require a very small hoist footprint, then narrow two-pipe or four-pipe masts can be used.